Process equipment design

Tailored Solutions We tailor our project delivery solutions and process management services to the unique needs of each client, and the specific requirements of each project. From concept to closeout, we offer tailored solutions and services.

Process equipment design

Properly designed equipment is essential for the production of high-quality, cost-effective products. Equipment design is necessarily the broadest category of the six enabling technologies, since it ultimately serves as the vehicle to implement all of the other enabling technologies.

As pointed out in the introduction to this report Process equipment design 1the United States must be able to manufacture products of superior quality at competitive prices in order to maintain its standard of living and its standing in the world economy.

The introduction also emphasized that competitiveness depends on new and improved processes and less on product technologies. Thus, the design of the equipment used in manufacturing processes assumes a dominant role in industrial competitiveness. This point was recently underscored by Eagar and Fine The processing equipment industries play a unique role in an economy.

Stainless Process Equipment Inc.

They provide the tools for all the other manufacturing sectors in the economy. Even though education of the workforce, improved operations management, faster transportation, and communication have each increased productivity, in the long run, the influence of improved processing equipment almost certainly provides a multiplier which exceeds all of these other factors combined.

The importance of equipment design is clear to the technical community. Many recent articles have discussed topics such as robust design, design optimization, design for manufacturing, and doctoral programs in design.

A case can be made for the importance to domestic manufacturers of high-quality, locally produced processing equipment rather than reliance on foreign suppliers. Page Share Cite Suggested Citation: Issues and Opportunities in Research.

The National Academies Press. Rapid speed of operation, high accuracy of positioning, high structural rigidity, flexibility of operation, user friendliness, and safety are highlighted below, because experience has indicated that improvements in these areas are highly desired and thus most likely to be incorporated if they are shown to be cost-effective costs associated with the purchase, installation, and maintenance of new equipment must be competitive with existing alternatives.

Specific details would depend, of course, on the specific unit process under consideration. The end result would be world-class unit process equipment available at a competitive sales price with low lifecycle costs.

However, the committee suggests that the greatest research need in the area of equipment design is the interaction of process equipment manufacturers with one another and with university research, national laboratories, and other government agencies to identify needs that are broader and more long-range than those the committee has identified for the other five enabling technologies or in this section on equipment design.

Two strategies have been employed to develop advanced unit process equipment—incremental and breakthrough. The incremental approach involves a systematic series of improvements to the equipment that address specific needs.

It is a relatively low-risk approach, usually involving a multidisciplinary team of researchers.

Progressive Cavity Pump Repair

Over a period of time, significant advancements to existing unit process equipment can result. Innovative, breakthrough design concepts, on the other hand, have the potential for dramatic improvements in unit process equipment. This a high-risk, high-payoff approach that rarely results from a systematic approach to equipment design.

This strategy involves exposing a talented, creative individual to the problems and providing a stimulating environment in which ideas can flourish without a great number of constraints. These innovative ideas can then be further refined and developed with a systematic approach.

Research Opportunities Efforts are needed to improve speed of operation. This topic includes fast movement of the equipment components during the unit process sequences with minimal dwell times during the unit process cycle.

Process equipment design

Examples of rapid operation speed in the machine tool area are the ultrahigh spindle speeds in milling and Page Share Cite Suggested Citation: Additionally, providing minimal warm-up time from process start-up to operational steady state are critical to attaining rapid speed of operation and achieving consistency of part characteristics, such as dimensional control.

Efforts to provide highly reproducible, accurate positioning of production equipment component motions are needed to support the precision levels discussed in Chapter Positional errors in processes lead to variations in product tolerances and quality.

Errors in equipment motion locations, either on an absolute based on one reference point or incremental based on sequential locations base, often are additive in nature, with errors that are introduced early in the process sequence influencing positioning problems later in the unit process sequence Tomizuka, The areas requiring emphasis are unit processes with multiple action sequences that possess several reference points that could be used for positioning.

Very rigid, stiff structural elements of unit process equipment are required, since these are primary factors determining positional accuracy and the level of precision inherent to the process.

Also, equipment designs that minimize thermal distortion due to nonuniform temperature variation that is caused by internal and external heat sources are needed so that the equipment can maintain positional accuracy during all phases of equipment operation. Developing unit process equipment that can readily and rapidly change the operation format and tooling for a variety of parts is critical to the competitiveness of a unit process.

Achieving short job-to-job setup times; flexible, versatile tooling and fixtures; and multiple process capability is important. Current trends in small-lot-size manufacturing place even greater emphasis on these aspects of equipment design.

The development and maintenance of the skill base needed to operate unit process equipment efficiently is a constant challenge in manufacturing. Equipment design should lend itself to efficient training of both operators and maintenance personnel.

There are opportunities to improve the unit process 1 Rigidity defines the elastic deflections that are experienced by the equipment components and the workpiece from the working loads induced during the unit process operation. For example, designs that are compatible with control features, requiring minimal intervention during operation, are needed.

Process engineering - Wikipedia

Considerations that override all others are to develop equipment that is safe to operate and imposes no harmful effect on the workers or environment.Since Nova-Tech International has been providing quality laboratory equipment and supplies, chemical metering pumps, chemical process equipment and controllers, and HVAC indoor air quality products to our customers worldwide.

Process Equipment Design syllabus by imrancenakk in Types > Research and process equipment design1/5(1). process equipment used industrial equipment surplus second hand process equipment used process equipment plant process equipment used surplus equipment equipment salvage Steam Turbines Reciprocating Compressors Centrifugal Compressors process equipment list process equipment Heat Exchangers process equipment Vessels chemical plant equipment Air Fin Heat Exchangers process plant and equipment.

Process equipment design

buy and sell surplus process plants and equipment. Mold In sand casting, the primary piece of equipment is the mold, which contains several components. The mold is divided into two halves - the cope (upper half) and the drag (bottom half), which meet along a parting mold halves are contained inside a box, .

Microfiltration is a type of physical filtration process where a contaminated fluid is passed through a special pore-sized membrane to separate microorganisms and suspended particles from process is commonly used in conjunction with various other separation processes such as ultrafiltration and reverse osmosis to provide a product stream which is free of undesired contaminants.

EPIC Process Systems | Proven Design/ Build for Complete Systems